home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1996 #14
/
Monster Media No. 14 (April 1996) (Monster Media, Inc.).ISO
/
wp
/
tsetd25.zip
/
POTPOURR.DAT
< prev
next >
Wrap
Text File
|
1996-01-31
|
41KB
|
995 lines
;
;
; SemWare Potpourri Macro data file.
;
; *WARNING* DO NOT EDIT THIS FILE DIRECTLY!!!
;
; The Potpourri macro expects this file to be in a certain format.
;
;
ASCII Alternate ASCII chart
Overview:
This ASCII chart provides additional information for characters 0
thru 31.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
Adjust Adjusts text in a marked block to the right, left or center
Overview:
This macro allows you to adjust text within a block by aligning it
either on the left or right, or by centering it. If a column block
is marked, the macro operates on the text in the block using the
leftmost and/or rightmost column boundary (as appropriate). If a
line or character block is marked, it operates on the text on the
lines spanned by the block, using the left and/or right margin (as
appropriate). A selection menu issued by the macro allows you to
choose whether you want to left adjust, right adjust, or center the
text.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
Align Aligns current line with previous line, or at cursor position
Overview:
Align() positions the FirstNonWhite character on the current line to
the same position of the FirstNonWhite character on the previous
line or the first preceding non-blank line. The cursor will then be
moved to the next line in the file.
AlignAtCursor() positions the FirstNonWhite character on the current
line to the cursor position. The cursor will then be moved to the
next line in the file.
Keys:
<Ctrl F5> Align()
<Ctrl F6> AlignAtCursor()
Usage notes:
If the current line is blank, the cursor will still go to the next
line of the file, but no alignment will occur.
Book Bookmark manager - allows visual display of active bookmarks
Overview:
These macros will give a visual display of all active bookmarks.
This comes in very handy when you cannot remember which bookmark
takes you to the desired location. When you pop up the PickList, a
portion of the line where bookmarks are located will be displayed so
you can choose based on the content of the line.
Keys:
<Ctrl /> PlaceBookMark
<Ctrl .> GotoNextBookMark
<Ctrl ,> GotoPreviousBookMark
<CtrlShift /> ViewBookMarkList
Usage notes:
Using the <Ctrl /> key, you can place bookmarks at any place in any
file. The bookmarks are numbered in sequential order beginning with
1. Pressing the <Ctrl .> and <Ctrl ,> keys will go to the next and
previous bookmarks respectively. Pressing the <CtrlShift /> key
will invoke the PickList which shows the bookmark number, file, line
number, and part of the text on the line where each bookmark is
located.
CD A "chdir" command for TSE
Overview:
Provides a facility to change the current directory within TSE.
Either full or partial pathnames may be entered. Limited to drives
identified by alphabetic letters followed by a colon (e.g., "c:").
Detailed help is available by invoking the macro and following the
prompts.
Calendar Displays a visual, changeable calendar
Overview:
Three calendar displays are available -- Medium-Size Single Month,
Three Months at a Time, and a Small Single Month. (Press <Alt C> to
toggle between them.)
A small calendar can be inserted into the current file by pressing
<Alt I>. Here is a sample:
┌────────────────────┐
│April 5th 1993│
│Su Mo Tu We Th Fr Sa│
│ 1 2 3│
│ 4[ 5] 6 7 8 9 10│
│11 12 13 14 15 16 17│
│18 19 20 21 22 23 24│
│25 26 27 28 29 30 │
└────────────────────┘
Keys:
Next Day <CursorUp> or <CursorRight>
Previous Day <CursorDown> or <CursorLeft>
Next Month <+>, <SpaceBar> or <Enter>
Previous Month <-> or <BackSpace>
Next Year <PgUp>
Previous Year <PgDn>
First Day Of Month <Home>
Last Day Of Month <End>
First Day Of Year <Ctrl Home>
Last Day Of Year <Ctrl End>
Today <Alt T>
Change Calendar Type <Alt C>
Insert Calendar into Text <Alt I>
Exit Calendar <Escape>
ClipView Simple ClipBoard Viewer utility for PROJECTS
Overview:
This file provides a simple ClipBoard viewer. It allows ClipBoards
"A" through "Z" to be viewed. It was written as a support file for
PROJECTS.
Keys: (none)
Usage notes:
This macro may be executed from the PROJECTS macro, or may be
executed directly from Potpourri or the "Execute Macro:" prompt.
Clock StatusLine clock for TSE
Overview:
This clock uses binary support to help determine whether or not data
is overlaying the spot where the time would go. It also retrieves
its color attribute byte from the first byte on the screen, so it
always knows what color to set the clock to.
In addition, if "Eliminate Snow" is set within TSE, snow checking
will also be performed, if the card is determined to be a CGA card.
Keys: (none)
Usage notes:
Simply load or execute this macro to display a simple clock on the
StatusLine.
CmpFiles Compares the current file to a backup file
Overview:
The user will be prompted for a backup filename. This backup file
may be inside an "ARC", "ARJ", "LZH", or "ZIP" file, or it may be a
stand alone file. If the file is inside an archive, then the
filename must be the same as the current filename. Note that there
may be many different files inside the archive, but only the one
that matches the current filename will be extracted.
The two files will be split (either vertically or horizontally).
Cursor movement keystrokes will be fed to both windows so that they
move simultaneously, in sync with each other.
Text may be scanned, and differences will be highlighted.
The video mode may be changed from 25 to 36 to 44 to 50 lines to
show more detail.
F1 is available for help.
Whitespace characters (spaces and tabs) are automatically converted
to a single space character by default, in an effort to reduce false
comparisons. This option may be toggled by pressing the "W" key.
Once a re-sync has been accomplished, both windows will update to
the end of the difference text, with the re-synced lines adjacent to
each other on line 12 of the screen. Difference text will be marked
in both windows, for easy comparison. Press the grey- key to
retreat to the BEGINNING of the difference text, then press the
grey+ key to move back to the END of the difference text. Hit the
enter again to continue the search process, -- to find and highlight
the next difference.
Keys: (none)
Usage notes:
This macro is designed to be run from PROJECTS or may be executed
directly from Potpourri. It is automatically purged when done.
LIMITATIONS: -Line length must be under 256 characters.
-although whitespace errors will NOT cause files that
are already in sync to de-sync (unless the whitespace
filter is turned off), TSE's basic search mechanism is
used to re-sync, and whitespace cannot be filtered out
here. This is usually not too big of an issue unless
you completely en-tab, or de-tab one of the two files.
Then re-syncing will NOT take place.
-Your file decompressor must be in the path, or a "File
Not Found" error message will result.
The usual disclaimer -- Use these macros at your own risk! I will in
NO WAY be responsible for ANY problems resulting in their use.
CUAMark Enables <Shift>+cursor-keys to emulate CUA-style block marking
Overview:
This macro modifies the <Shift>+cursor-keys to emulate CUA-style
block marking and manipulating. It also assigns other keys to
comply with CUA standards, including key assignments for Paste (from
the System ClipBoard), CopyBlock (from the System ClipBoard), Cut
(to the System ClipBoard), and DelBlock.
Keys:
<Shift Ins> Paste-to-clipboard
<Ctrl Ins> Copy-from-clipboard
<Shift Del> Cut-to-clipboard
<Ctrl Del> DelBlock
<Shift CursorRight> Mark while going right
<Shift CursorLeft> Mark while going left
<Shift CursorUp> Mark while going up
<Shift CursorDown> Mark while going down
<Shift Home> Mark while going to begline
<Shift End> Mark while going to endline
<Shift PgUp> Mark while going page up
<Shift PgDn> Mark while going page down
<CtrlShift CursorRight> Mark while going word right
<CtrlShift CursorLeft> Mark while going word left
<CtrlShift Home> Mark while going begwindow
<CtrlShift End> Mark while going endwindow
<CtrlShift PgUp> Mark while going begfile
<CtrlShift PgDn> Mark while going endfile
Usage notes:
If you wish to make this macro a permanent part of your
configuration, then simply add "CUAMark" to the AutoLoad list on
the Macro menu.
Date Inserts current date (format includes Month spelled out)
Overview:
This macro inserts the current date with the full name of the month
and a 4-digit year. The format is as follows:
January 27, 1994.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
DelToBol Delete text from cursor to beginning of current line
Overview:
This macro is the complement to the DelToEol() command. All text
from the beginning of the line through the position preceding the
cursor will be deleted.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
EditFile Enhanced EditFile command
Overview:
This macro enhances EditFile() by trying to load the file from the
current directory first, and if unsuccessful, it then tries the
current file's directory. If wildcards are used, two picklists will
be presented -- one for the current directory and one for the
current file's directory.
Simply load this macro and press <Alt E> to pull up the
SmartEditFile() prompt.
Keys:
<Alt E> SmartEditfile()
Usage notes:
With this macro, you can literally tag and load thousands of
filenames in mere seconds (for example, it took just 12 seconds to
mark and load all 433 filenames in one of my larger directories).
Major features include:
1. File tagging for multiple file loading and deletions.
While in an Edit PickFile, multiple files may be tagged by
first highlighting a file and then by pressing the SPACEBAR. A
tag will appear in the "tag" position of the PickFile in the
column along the left.
Tagging key alternatives to the SPACEBAR include the GREY PLUS
key, the GREY MINUS key, the INSERT key, and the LEFT mouse
button.
Press ENTER or click the RIGHT mouse button on a filename, to
load all of the tagged files, or just the selected file if no
tags are present. Both normal files, as well as binary and
hex files, may be tagged and loaded in this manner.
Press DELETE to delete all tagged files, or just the selected
file if no files are tagged.
In addition, subdirectories may also be deleted, provided that
they are empty. Subdirectories may NOT be tagged.
2. PickFile Sorting
If a wildcard is utilized, or if a directory is referenced,
then TSE will provide a PickFile showing multiple file
choices. This PickFile may now be sorted. Files may be
sorted by name, extension, date, or size.
3. Dual Directory Searching
If a file is not found in the current directory, and if the
current file at the top of TSE's ring of files is in a
directory different from the current directory, then an
attempt will be made to locate the file(s) in this directory.
This action will apply to both single files as will as
wildcard PickFiles and with multiple filenames.
Expand Expands the current partial word based on match in current file
Overview:
This macro file provides a macro that operates like a limited,
dynamic Template mode. It expands, or completes, the "partial" word
to the left of the cursor based on other words in the file. When you
execute Expand from the Potpourri PickList, the Expand macro is
assigned to <Ctrl H>.
Keys:
<Ctrl H> Expand()
Usage notes:
With this macro activated, just press <Ctrl H> each time you want to
complete the partial word immediately preceding the cursor. The
macro searches backward and forward in the file for words that begin
with the string that you typed as the partial word. If only one
match is found, the partial word is replaced with the expanded word.
If multiple matches are found, the macro first displays a PickList
of expanded entries from which you can choose. To select an
expanded word from the PickList, move the cursor bar over the
desired entry and press <Enter>. Your partial word is then replaced
in the text with the expanded word you selected.
Expr Calculates the value of a specified mathematical expression
Overview:
This macro operates as a simple calculator, and handles decimal or
hexadecimal numbers. For decimal numbers, only whole numbers are
accepted.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
The following operations are available:
> SHR (bitwise shift right)
< SHL (bitwise shift left)
~ COMP (2's complement)
% MOD (modulo division)
& AND (bitwise AND)
| OR (bitwise OR)
^ XOR (bitwise eXclusive-OR)
+ Addition
- Subtraction
* Multiplication
/ Division
Precedence is as in SAL, but can be forced by using parenthesis.
Hex number may be entered using C format, or ending with an 'h' or
'$'. Regardless, the first character _must_ be numeric.
FillNum Fill a COLUMN block with a sequence of numbers
Overview:
This macro fills a column block with a series of numbers that can be
incremented or decremented. You specify the beginning and
(optionally) ending number in the series, as well as the positive or
negative amount by which to increment or decrement the series.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
FindEOL Macros to find and replace text that include the end of line
Overview:
This macro file provides a group of macros that allow you to find
and replace text that includes the end of line, if you specify the
end of line (as "$") in the search string. These macros are useful
for locating a text string that begins on one line, and ends on
another. They are also useful for such tasks as:
∙ Deleting extra blank lines in a file
For example, to change all occurrences of 2 blank lines to a
single blank line, use this macro to search for "$$$" and
replace with "$$".
∙ Removing trailing text from certain lines
For example, to remove a trailing comma from any lines
immediately followed by a blank line, use this macro to search
for ",$$" and replace with "$$".
When you execute this macro file, special find, replace, and repeat
find/replace macros are assigned to keys. A message is displayed to
identify the key to which each macro is assigned.
Keys:
<AltShift F> FindReplaceEol(TRUE) // Find only
<AltShift R> FindReplaceEol(FALSE) // Find and Replace
<AltShift L> RepeatFindReplaceEol() // RepeatFind
Usage notes:
There are a few limitations to this macro:
1 - Does not support regular expressions.
2 - Search string cannot be a single '$'.
3 - When lines are joined by replacing the '$' with nothing,
the resulting line must be less than the max line length.
InsMatch Inserts the matching character for a specific groups of chars
Overview:
This macro causes the editor to insert the matching character for a
specific group of bracketing character pairs, including the
following: [], (), {}, <>, '', "". Execute this macro to toggle
the "insert matching" mode ON or OFF. When ON, the matching
character of a pair is automatically inserted when you type the
first character. For example, if you enter the character {, this
macro inserts the matching character, }.
Keys: Char Inserts
[ []
' ''
" ""
{ {}
< <>
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
Each time this macro is executed, the EnterMatching state is
toggled. The first time, EnterMatching is enabled. To disable,
simple execute the macro again.
Justify Justifies a paragraph based on the right margin
Overview:
This macro work just like the WrapPara() command, but also justifies
each line to the RightMargin.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
LdFList Loads all files listed in the current file
Overview:
This macro will load all files listed in the current file.
Keys: (none)
Usage notes:
The list of files to be loaded is assumed to be in the following
format:
filename1
filename2
filename3
filename4
The list of files is abandoned after the command is completed.
LongstLn Locates the longest line in the current file or block
Overview:
This macro locates the longest line in the current file. When you
execute this macro, you are positioned on the longest line, and its
length is displayed on the StatusLine. If a block is marked in the
current file, then the search is limited to the block.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply
select it from the Potpourri menu.
Overlay Flip between two loaded files, showing differences
Overview:
Flips between two files on the screen QUICKLY so file differences
are apparent. This macro is intended to show differences in text
which is somewhat similar. I use the macro to display differences
between two similar files of source. This indicates when lines have
been added or deleted. I then update one or the other files by
inserting the appropriate # of lines as necessary to only "flicker"
differences on similar lines
If bookmarks 'A' and 'B' are placed (configurable below) the files
containing these bookmarks are flipped.
If bookmarks are not specified, Current and Next Files are flipped
Para Macros to go to the end and to the next and previous paragraph
Overview:
These macros will position the cursor on the next or previous
paragraph, or at the end of the current paragraph. They assume that
there is at least one blank line between paragraphs.
Keys:
<Ctrl CursorDown> NextPara()
<Ctrl CursorUp> PrevPara()
<Ctrl CenterCursor> EndPara()
Usage notes:
If you wish to make this macro a permanent part of your
configuration, then simply add "Para" to the AutoLoad list on the
Macro menu.
Projects Project management macro for saving and restoring files
Overview:
Project management macro for TSE. This macro will save currently
loaded files and several pre-defined editing variables as a named
project. The macro may then be run to reload the previously saved
files for a given project.
Keys:
<Ctrl K><M> ShowMainMenu()
<Ctrl K><P> SaveProjectFiles()
<Ctrl K><A> SaveProjectFilesAndExit()
Usage notes:
Executing Project will prompt the user with a menu allowing PROJECTS
to be added to the AutoLoad list. Adding PROJECTS to the AutoLoad
list will allow projects from the command line or from an initial
picklist each time the editor is executed.
To make changes to this macro or assign pre-defined functions to
keys, see the "User Configurable Area" below.
This file contains source for SAVING/RESTORING project information.
Projects are stored in a PRJ subdirectory located just after the
directory where the PROJECTS macro is located (eg) C:\TSE\MAC\PRJ.
Now, when you save a project, you will be presented with a message
box asking you for a project name (!!LAST!! is the default) Note
that you should select your own name for the project, since !!LAST!!
will be overwritten each time a project is saved. That's it --
project information will be saved, and made available for later
restoration. This allows for NEAR SEAMLESS EDITING across sessions.
It is UNNECESSARY to change into the PRJ subdirectory to restart a
project. Simply type "e projectname" (with or without the ".PRJ"
extension), and TSE will automatically open that project for you --
REGARDLESS OF THE CURRENT DIRECTORY SETTING. (Note also that it is
NOT necessary to have the "PRJ" subdirectory in your path
statement).
Although this is convenient, there is ANOTHER WAY. Every time a
project is saved, TWO project files are created -- one with the
project name that you assign when you exit the editor, and the other
with the name "!!LAST!!.PRJ". Since an "!" is near the beginning of
the alphabet, this file should always be the first file in a
picklist of files. By starting the editor with just "e <enter>",
this picklist will be displayed. Simply press <enter> a second time
to edit the LAST PROJECT FILES, or move through the picklist to
choose another project. If you do not wish to edit a project, just
press <Escape> to get the familiar "File(s) to edit" box.
Saved information is as follows:
ALL FILENAMES currently being edited.
ALL STANDARD BOOKMARKS across ALL files.
ALL AUDIT BOOKMARKS across ALL files.
ALL KEYSTROKE MACROS (including scrap macro).
The CURRENT DRIVE AND DIRECTORY.
The VIDEO MODE (25, 28, 43, or 50 lines).
The MAIN CLIPBOARD DATA (all marking types).
Up to 26 NAMED CLIPBOARDS (single characters "A" through "Z" only).
Any MARKED BLOCK (all marking types).
The state of INSERT.
The state of AUTOINDENT.
The state of WORDWRAP.
The state of the RIGHT MARGIN.
The state of the HEX display function.
The state of the BINARY display function.
ALL HISTORY information.
QuickXit Quick Exit - prompt for saving or abandoning all changed files
Overview:
An alternative way of exiting the editor. If no changed files just
exit. Otherwise, give the user the choice of either canceling the
command, quitting the editor without saving the files, or save all
changed files and then quit the editor.
Keys: (none)
RePage Places page-breaks in current file based on printer settings
Overview:
This macro places formfeed characters (ASCII 12) throughout a file,
based on the page size. (The page size is determined by the value
of the PrintLinesPerPage variable, which can be set from the Print
Menu, by selecting "Lines Per Page" under "Set Options"). When you
execute this macro, it pauses on each line where a formfeed should
go, according to the page size, and places a cursor bar on that
line. You can then select that line on which to place the formfeed,
or move the cursor bar to a previous line in the file to select a
different line on which to place the formfeed. After you select the
line for the formfeed, the macro resumes, relative to the location
of the selected line.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
ReplaceF Reload or replace the current file
Overview:
This macro simply calls the internal ReplaceFile() command to allow
you to reload the current file (or replace it with another file).
Keys: (none)
ShowCurr Show ascii and hex value of current character on the StatusLine
Overview:
This macro will display the ascii and hex values of the current
character on the right edge of the status line.
Keys: (none)
ShowKey Displays information about keys available in TSE
Overview:
This macro displays information about the assignable keys on the
keyboard. When you execute this macro, an information chart is
displayed on the screen. You then press a key or key-combination
(using the <Ctrl>, <Shift>, and <Alt> keys). If the key is one that
the editor recognizes as an assignable key, a line is displayed in
the chart that identifies the following information for that key:
∙ screen display character (if applicable)
∙ ASCII code
∙ scan code
∙ hexadecimal representation
∙ decimal representation
∙ key name (that is, the "name" to use for that key in an editor k
assignment)
If the key is not assignable, nothing is displayed when you press
the key.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply
select it from the Potpourri menu.
State Save/Restore editor state information (files/windows/etc)
Overview:
This macro allows you to interactively save the editing environment
for the current session, or restore the previously-saved
environment.
Keys: (none)
Usage notes:
The State macro can come in handy when you need to interrupt your
current editing session to view another set of files. Without
exiting from the editor, you can save the environment for the
current session; load additional files and/or change certain editing
options; then automatically restore the previous environment so you
can return to the set of files and options as they were previously.
When you execute this macro, the editor displays a prompt box from
which you can select "Save State" to save the current editing
environment, or select "Restore State" to restore the
previously-saved environment.
Command line format:
state [-g|-l] [-r|-s] [-ffilename]
where:
-g use global state file (default)
-l use local state file
-r restore
-s save
-ffilename alternate file-path (default is tsestate.dat)
-q don't complain if state file not found
Things that TSE saves via other means:
- recent files
- history
Things saved via this macro:
- bookmarks
- windows
- files
- common-modes
- block
Format of the saved information:
[state v1.0]
[files]
line row pos xoffset filenames binary_mode display_mode
[bookmarks]
bookmark line row pos xoffset filename
[windows]
curr_windowid display_boxed show_statusline show_mainmenu show_helpl
windowid x1 y1 length height line row pos xoffset filename
[block]
type begline begcol endline endcol filename
[modes]
insert auto wordwrap rightmargin leftmargin tabtype tabwidth backups
Sum Sums a column of numbers marked as a COLUMN block
Overview:
This macro sums up a column of numbers that have been marked in the
text as a column block. The result is optionally inserted in the
text. Sum handles decimal and hexadecimal numbers. For decimal
numbers, it accepts positive and negative (identified with a
preceding "-" sign) numbers, as well as decimal-point fractions.
Keys: (none)
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
Sums either base 10 (decimal), base 16 (hexadecimal), or mixed.
For base 10, a fractional part is allowed and may be up to 8 decimal
places. Fractions are disallowed for hexadecimal numbers.
For base 16, a preceding '0x' is ignored, as is a trailing 'h'.
For mixed base, a preceding '0x' or a valid hexadecimal letter a-f
or a trailing 'h' forces base 16 for that entry. Otherwise, base 10
is assumed.
The fractional part is maintained within (-1,1) to avoid overflow.
Commas within a number are ignored.
Only the final result is placed in the necessary form for display.
To find a number, the cursor scans left to right until a numeric
sign or valid number is encountered. Only whitespace is skipped.
Also, only one sign is allowed. In other words, --1 is not allowed.
TabUtil Converts tab characters to spaces, or spaces to tab characters
Overview:
This macro converts tab characters in the current file to spaces, or
converts spaces to tab characters. When invoked, a menu is
presented allowing you to select Entab or Detab.
To limit the scope of the conversion to a block, execute the macro
from within a marked block. NOTE that it will convert the entire
lines that the blocks span.
Usage notes:
This macro does not have any key assignments. To use, simply select
it from the Potpourri menu.
When entabbing, if a tab character or a single or double quote is
encountered, the rest of that line is not entabbed.
Tree Generates and displays directory TREE for specified path
Overview:
Generates and displays a directory tree for a given drive and/or
subdirectory.
Keys: (none)
Usage notes:
Invoke the TREE macro via the ExecMacro() prompt. On the
command-line to TREE you may optionally specify a filespec and
options:
The 'filespec' is the location to start the tree. All
subdirectories under that location will be displayed.
Options are
-l Long format
-g Graphical output (default)
-t Show Totals
-h Show Helpline
-f Show Filenames
If the '-f' option is specified, files meeting the filespec
name and extension will be displayed as well. Note, however,
that if a filename is specified, the '-f' option is ON by
default.
For example, "Tree c:\util\*.s" will display all files
which match "*.s" within and under the "c:\util" directory.
If the '-f' option is not specified and no filename is specifi
the name and extension are ignored and not displayed.
When the TREE is display, if the '-l' option has been specified,
<Tab> will toggle between the filename output and fileinfo output.
Unload Quit/Abandon all unchanged files, excluding the current file
Overview:
Use this macro when you have loaded a lot of files (for instance,
using the multi-file find/replace) and are no longer interested in
keeping all of them loaded, cluttering things up.
Keys: (none)
Where A "whereis" command for TSE
Overview:
This command will search a drive or multiple drives for the
specified file(s), and present the user with a list of all such
found files. From this list, you can either edit or delete the file.
Keys:
<CtrlAlt W> Where()
Usage notes:
Normally, Where searches the drives that have been specified via
the configuration menu. However, you can override the default by
specifying one or more drives along with the filename, as in:
"cde:*.doc", which would search drives "c", "d", and "e" for all
"*.doc" files.
Searches may also include a path, for instance:
C:\TSE\*.MAC will find all ".MAC" files in all of the TSE
subdirectories. (eg) C:.\*.EXE will find all ".EXE" files
beginning with the current directory.
Wipe Move or Cut a block and fill with spaces
Overview:
This macro file provides two macros: MoveWipe, which is a variation
of the MoveBlock command; and CutWipe, which is a variation of the
Cut (to the System ClipBoard) command. When you execute Wipe from
the Potpourri PickList, MoveWipe is assigned to <AltShift M>, and
CutWipe is assigned to <Shift Grey*>. These macros behave similarly
to the commands on which they are based, except that the area of
text from which the block is moved or cut, is filled with spaces.
Also, with MoveWipe, if a column block is moved, the editor overlays
existing text with the contents of the block, rather than inserting
the contents of the block into its new location.
Keys:
<AltShift M> MoveWipe()
<AltShift Grey-> CutWipe()
Usage notes:
If you wish to make this macro a permanent part of your
configuration, then simply add "Wipe" to the AutoLoad list on the
Macro menu.
Wordcnt Count the number of words in the block or file
Overview:
Count the number of words in the current file, or, if the cursor is
in a block, the number of words in the block. The result is
displayed.
Words are assumed to be in the set a-z, A-Z, 0-9 and _.
